tracert空格域名或IP
比如，想知道你的电脑到腾讯首页的所有路由
tracert
当数据报从你的计算机经过多个网关传送到目的地时，Tracert命令可以用来跟踪数据报使用的路由 路径。该实用程序跟踪的路径是源计算机到目的地的一条路径，不能保证或认为数据报总遵循这个路径。如果你的配置使用DNS，那么你常常会从所产生的...
tracert命令的作用是跟踪路由，也就是从源主机到目标主机经过的路径。Q648905586。
C:\\Documents and Settings\\Administrator>tracert /?
Usage: tracert [-d] [-h maximum_hops] [-j host-list] [-w timeout] target_name
Options:
-d Do not resolve addresses to hostnames.
-h maximum_hops Maximum number of hops to search for target.
-j host-list Loose source route along host-list.
-w timeout Wait timeout milliseconds for each reply.
C:\\Documents and Settings\\Administrator>tracert
Tracing route to [119.75.216.20]
over a maximum of 30 hops:
1 32 ms 30 ms 41 ms 117.35.224.1
2 31 ms 33 ms 34 ms 229.131.145.219.broad.bx.sn.dynamic.163data.com.
cn [219.145.131.229]
3 56 ms 35 ms 35 ms 165.131.145.219.broad.bx.sn.dynamic.163data.com.
cn [219.145.131.165]
4 66 ms 65 ms 68 ms 202.97.38.177
5 59 ms 58 ms 57 ms 220.181.16.166
6 64 ms 65 ms 65 ms 220.181.17.114
7 62 ms 62 ms 61 ms 119.75.216.20
Trace complete.
tracert是检测你的机器通到几个路由中转到目的地IP的命令。
主要参数和参数作用如下:
-d Do not resolve addresses to hostnames.
-h maximum_hops Maximum number of hops to search for target.
-j host-list Loose source route along host-list (IPv4-only).
-w timeout Wait timeout milliseconds for each reply.
-R Trace round-trip path (IPv6-only).
-S srcaddr Source address to use (IPv6-only).
-4 Force using IPv4.
-6 Force using IPv6.
就是开始菜单→运行→CMD
Usage: tracert [-d] [-h maximum_hops] [-j host-list] [-w timeout] target_name
Options:
-d Do not resolve addresses to hostnames.
-h maximum_hops Maximum number of hops to search for target.
-j host-list Loose source route along host-list.
-w timeout Wait timeout milliseconds for each reply.